Drilling fluid agitatorMud agitaor also called mud mixer. It is used for drilling fluid mix to prevent the heavy drilling size subside the bottom of mud tank. RuiLin's Mud Agitator has two types, horizontal type and vertical type. This is divided according to the motor's type. Usually, the horizontal type is Tubrine worm reducer.
In the common design, the shaft length is more than 1700mm, there need a centering sleeve in the bottom to make sure do not break the shaft on working. The impeller's diameter is 1/3 of the mud tank length.
RuiLin's mud agitator is designed very humaization. The impeller is propeller type and fixed on the shaft using the screws and not welded directly. Thus convenient for replacement and remving.
Features
Typical C face motor installation
Small footprint without skid
Helical-Bevel gearbox
Motor is horizontal type and explosion-proof motor for outdoor using
Technical Parameters
|
Model |
RLJBQ5.5 |
RLJBQ7.5 |
RLJBQ11 |
RLJBQ15 |
RLJBQ22 |
|
Motor |
5.5KW(7.5hp) |
7.5KW(10hp) |
11KW(15hp) |
15KW(20hp) |
22KW(30hp) |
|
Shaft length |
According to tank size and client’s requirement |
||||
|
Impeller type |
Canted or turbine blade |
||||
|
Impeller layer |
Double or single |
||||
|
Impeller diameter |
Ø600~Ø1200mm |
||||
|
Speed |
60RPM or 73RPM |
||||
|
Remark |
When shaft length exceeds 1.7m, there will be stabilizer |
||||
Benefits
1). Longer usable life on motor and gear box
2).Require less space also easy to handle
3).High efficiency, low noise, low operating temperature
4).Adaptable for different application
