Company News_Company News_Tangshan Ruilin Technology Co., Ltd

current location：

/

Company News

Three connected shale shakers

Three connected shale shakers Shale shakers are the primary solids separation tool on a rig. After returning to the surface of the well the used drilling fluid flows directly to the shale shakers where it begins to be processed. Once processed by the shale shakers the drilling fluid is deposited into the mud tanks where other solid control equipment begin to remove the finer solids from it. The solids removed by the shale shaker are discharged out of the discharge port into a separate holding tank where they await further treatment or disposal. Shale shakers are considered by most of the drilling industry to be the most important device in the solid control system as the performance of the successive equipment directly relates to the cleanliness of the treated drilling fluid/ drilling mud. Shale shaker Cut Point > 76μm

2026-06-17

Three connected shale shakers Manufacturers china introduces the daily maintenance of the shaker

Three connected shale shakers Manufacturers china will introduce you to the daily maintenance of the vibrating screen: 1. Check the supporting device of the sieve body every shift, and observe whether the hollow rubber pads are obviously deformed or degummed. When the rubber pads are damaged or excessively flattened, the two hollow rubber pads should be replaced at the same time.

2026-06-17

Drilling fluid screw pump

The signle screw pump is an ideal pump for feeding to the decanter centrifuge without shearing or agitating the drilling mud. The main parts are screw shaft (rotor) and screw shaft bushing. Because the special geometry shape of the two parts, they form pressurize capacity separately.

2026-06-17

RuiLin Solids Control Launches High-Efficiency Drill Vacuum Degasser for Enhanced Mud Treatment

RuiLin solids control vacuum degasser is engineered to quickly and efficiently remove gas bubbles from drilling mud, preventing gas-cut mud and reducing the risk of blowouts. Built with a compact design and high-capacity vacuum pump, it guarantees reliable performance even under tough drilling conditions.

2026-06-17

Three connected shale shakers

Three connected shale shakersShale shakers are the primary solids separation tool on a rig. After returning to the surface of the well the used drilling fluid flows directly to the shale shakers where it begins to be processed. Once processed by the shale shakers the drilling fluid is deposited into the mud tanks where other solid control equipment begin to remove the finer solids from it. The solids removed by the shale shaker are discharged out of the discharge port into a separate holding tank where they await further treatment or disposal.

2026-06-17

Drilling in horizontal well of deep heavy oil in Tuha Oilfield

CNPC news November 20th, in the Turpan Hami oilfield, Yuxi 1-102H well used to drill well to 4251 meters in 39.2 days, and completed well successfully. The drilling cycle was shortened by 53.4% and the penetration rate increased by 251.1%, which refreshed the new record of Yuxi deep heavy oil horizontal well drilling. 　　The Yuxi 1-102H well is a technical breakthrough well. In the process of drilling, Turpan Hami engineering and Technology Research Institute strengthens technological research and on-site production organization. Through adjusting drilling parameters and optimizing drilling fluid performance, we implement "one well one strategy, one stage and one strategy" as the core technology. In the upper part of the salt layer, soft rock easily reducing section using two-way well tools and supporting technology in horizontal vertical section, using PDC drill bit + high torque screw design for efficient control of oblique pressure composite drilling, in the oblique section with high whipstocking screw sliding drilling.

2026-06-17

2

…

16

Solids Control

ADD：East Tangqian Road, Kaiping District, Tangshan City, Hebei Province

TEL：+86-0315-2648088

E-MAIL：sales@ajgukong.com

Powered by：