High speed centrifuge is favored by more and more users. especially the environment required do not discharge the drilling mud to the mud pits on the ground. Features 1. High speed decanter centrifuge can improve working efficiency. 2. The high speed decanter can separate more fine particles, even 2 microns. 3. The motor is explosion proof. 4. The drum bowl is stainless steel 304. Model RLGLXJ355-1250N RLGLXJ450-1258N RLGLXJ450-1350N RLGLXJ600-1500N Treating capacity 40m3/h 60m3/h 60m3/h 80m3/h Main motor 30KW 37KW 45KW 55KW Back motor 11KW 11KW 11KW 22KW Feeding pump 7.5KW 7.5KW 7.5KW 11KW Separation size 2-5 micron meters Motor explosion-proof class  Exd II Bt4 Bowl diameters 355mm 450mm 450mm 600mm Bowl length 1250mm 1258mm 1350mm 1500mm Bowl speed 3400 rpm 2950 rpm 3200 rpm 2600 rpm    

The RLGZ Series Vertical Cutting Dryer uses centrifugal force to dry drilled solids in oil or synthetic base fluids. A stainless steel screen bowl traps “wet” solids and accelerates them up 800RPM. Liquid is forced through the screen bowl openings, while “dry” solids are extracted by the angled flights attached to the cone, which rotate slightly slower than the bowl. Features 1. The flights are made from hard high chrome alloy material to be anti-abrasive from solids and ensure long operational life vertical cuttings dryer. 2. Air Knife is Provided for cleaning the screen to avoid screen blinding. 3. Balance testing for all major rotary components to minimize vibration & noisy 4. Individual oil lubrication system with automatic alarm for pressure limit. 5. Screw conveyor installed under the dryer to pick up the dry solids for continues operation. 6. Cleaning pump provided for avoiding solids accumulation in the cuttings dryer Technical Parameters Drum Diameter Max. 720mm Speed 820 r/min Separation factor 360 Main drive power 55KW (75HP) Oil pump motor power 120W (0.16HP) Fuel tank capacity 60 (L) Treating capacity Max 30-50 t/h Efficiency after drying ≦5% Screen aperture 0.25-0.5mm Explosion-proof standard ExdIIBt4 Type of explosion-proof cabinet Standard Size 2200x1690x2150mm Weight 4500kg Frequency 380V/50HZ or 460V/60HZ or customised

RuiLin Hi-G Dry Shaker is a linear motion shale shaker, on the other hand, it is used to recover the mud from driling cuttings of the main shale shaker and hydrocyclone, so as to reduce the mud waste and drilling cost. It makes the liquid/oil content in the drilling cutting to as low as about 10% (w/w), to reach the purpose of protecting the environment.   Features: 1. High G-fore 2. Make the drilling cuttings more dryer 3. Weir type feed box is more applicable to on-site process 4. The mount assembly is hydraulic pressure   Technical Parameters Model RLS585-4K Vibrating mode Linear motion Motor power 2x1.94 KW Vibrating strength 7.5 G Capacity 150 m3/h Deck adjustment from -1 to 5 degrees Frequency 380V or 460V or customized Motor Type Explosion Proof Explosion-proof degree Exd II BT4 Screens number 3 pcs or 4 pcs Screen area 2.73m2

At present, the technology of the mud does not fall to the ground system has been basically mature. It has already been applied in the industry of all kinds of drilling bits. But  the most systems are the whole equipment, and the weakness is big volume, complex treating process, long maintenance process time etc. Our company according to the current  market requirements, specially designed modular mud not fall to the ground system and it is the outstanding equipment in the all new equipment.   Among the system, we can install dry shale shaker, vertical cutting dryer, mud decanter centrifuge, membrane pressure filter, spiral dryer etc two or several equipment to one  module. For the companies who has already installed the mud solids control system, do not change the new equipment, only need to install our companys treating model in the end of processing to reach the goal of waste water and waste cutting pollution-free emissions.      In addition, using our company independent designed drilling cuttings boxes at the same time to unified collect of drilling cuttings to be effective in preventing mud overflow caused  by torrential rain.   In order to meet the 250 HP to 3000 HP drilling RIGS needs. Our company system can finish 76-2 microns of drilling cuttings collected.  Finally the waste moisture content is lower than 10% / T, the lowest is 3% / T.

RuiLin Drilling Cutting Screw Conveyor  alos called RuiLin screw conveyor, is mainly used in oil base driling mud transport and dry drilling cuttings transport. It contacted with decanter centrifuge and vertical cutting dryer. The screw conveyor is designed 3 meters' long for each part, thus convenient for transporting. Technical parameters Model Trough Diameter Screw length Motor size Transfer capacity Rotation Speed RLSC14-24 14 inch 24 feet 7.5 KW 30 m3/h 40/50/60 RPM RLSC14-48 14 inch 48 feet 15 KW 50 m3/h 40/50/60 RPM RLSC18-24 18 inch 24 feet 11 KW 40 m3/h 40/50/60 RPM RLSC18-48 18 inch 48 feet 22 KW 60 m3/h 40/50/60 RPM

RuiLin (RL) screw conveyor is mainly used in oil base driling mud transport and dry drilling cuttings transport. It contacted with decanter centrifuge and vertical cutting dryer. The screw conveyor is designed 3 meters' long for each part, thus convenient for transporting. Technical parameters Model Trough Diameter Screw length Motor size Transfer capacity Rotation Speed RLSC14-24 14 inch 24 feet 7.5 KW 30 m3/h 40/50/60 RPM RLSC14-48 14 inch 48 feet 15 KW 50 m3/h 40/50/60 RPM RLSC18-24 18 inch 24 feet 11 KW 40 m3/h 40/50/60 RPM RLSC18-48 18 inch 48 feet 22 KW 60 m3/h 40/50/60 RPM