Solids Control SystemDescriptions: Solids control system including Shale shaker, Degasser, Mud cleaner (Desander/Desilter),Centrifuge, Centrifugal pumps, Mud agitator, Mud gun and Mud tank. Solids control Mud process system can be widely used in many industries. Including Oil and Gas drilling, HDD or trenchless, CSM exploration, Shielding, Piling, underground industry, tunnelling, mine exploration etc.  

The RLGZ Series Vertical Cutting Dryer uses centrifugal force to dry drilled solids in oil or synthetic base fluids. A stainless steel screen bowl traps “wet” solids and accelerates them up 800RPM. Liquid is forced through the screen bowl openings, while “dry” solids are extracted by the angled flights attached to the cone, which rotate slightly slower than the bowl. Features 1. The flights are made from hard high chrome alloy material to be anti-abrasive from solids and ensure long operational life vertical cuttings dryer. 2. Air Knife is Provided for cleaning the screen to avoid screen blinding. 3. Balance testing for all major rotary components to minimize vibration & noisy 4. Individual oil lubrication system with automatic alarm for pressure limit. 5. Screw conveyor installed under the dryer to pick up the dry solids for continues operation. 6. Cleaning pump provided for avoiding solids accumulation in the cuttings dryer Technical Parameters Drum Diameter Max. 720mm Speed 820 r/min Separation factor 360 Main drive power 55KW (75HP) Oil pump motor power 120W (0.16HP) Fuel tank capacity 60 (L) Treating capacity Max 30-50 t/h Efficiency after drying ≦5% Screen aperture 0.25-0.5mm Explosion-proof standard ExdIIBt4 Type of explosion-proof cabinet Standard Size 2200x1690x2150mm Weight 4500kg Frequency 380V/50HZ or 460V/60HZ or customised

RuiLin Particle impact system is very successful in the market.   Model: RLCYG   Product Features: The diesel tanks include various sizes and volumes of oil tanks/diesel tanks/overhead diesel tanks, such as square diesel tank, square overhead diesel tank, round diesel tank, round overhead diesel tank, etc.   Advantages of the product:    1 Design a reasonable scheme according to the matching requirements of the customer’s diesel engine. Use Q235 high-quality plate, with the thickness of 6mm (national standard).    2. The plate of cylinder uses butt welding. The whole tank uses double-side welding. The tank body is bent by steel plate and welded, with flaw detection of welded joint and bulge test of tank body.    3. The head uses standard butterfly spinning head with butt welding.    4. The tank body is provided with a DN500 manhole. Manhole flange and blind flange are made by 16mm-thick steel plate, flat and undeformed.    5. The cover plate of the manhole is provided with a DN65 flange oil-saving port to connect and disconnect the oil pipe. The oil-saving port is extended into the bottom of the tank, 200mm higher than the bottom of the tank. A welded elbow is used to protect the tank, which avoids the foam and agitation of sediment caused by refilling the oil. The manhole cover is also provided with a DN40 flange interface to install oil outlet pipe. The bottom of the tank is provided with a bottom valve. The top of the tank is provided with DN100 flange, and connected with a magnetic flap liquidometer. A DN50 flange connects with a ventilation cap.    6. The tank body is reinforced by 3-4 50×50×4 angle steel rings and A-frame.    7. The diesel tank is equipped with a stainless steel explosion-proof diesel pump inside and a liquidometer outside.    8. The external surface of the tank body uses reinforced anticorrosive treatment: three-layer glass cloth and four-time asphalt paint. The surface of the tank uses anti-corrosive, abrasion-resistant marine paint.    9. The tank body uses anti-thunder anti-static treatment.      Design Pressure: constant pressure   Operating Temperature: ≤50°   Volume: 20m3, 30m3, 40m3, 50m3, 60m3, etc.     The tank body performs sand blasting treatment, with the rust-protection grade of Sa2.5, and uses anti-corrosive, abrasion-resistant marine paint. Coating structure: primer – finish - glass cloth – finish - glass cloth - two-layer finish, with total thickness of no less than 0.6mm.      Service Life: 20 years   Standard: Oil tank is designed and manufactured in accordance with the standard of Q/HFD 005-2012 Drilling Oil Tank    The anti-corrosion of the tank accords with the standard of CNCIA-HG/T0001-2012 Painting and Inspection Criterion for Conductive and Anti-corrosion Coatings of Petroleum Tank    Tangshan Ruilin Technology Co.,Ltd not only researches, develops, designs and produces mud circulating system, mud recovery system, equipment and tank, but also designs and produces new-type diesel tank. Our diesel tank uses high-quality plate (special steel, carbon steel, stainless steel, etc. can be customized according to customer demands.), with complete models and volumes, such as square diesel tank, square overhead diesel tank, round diesel tank, round overhead diesel tank, etc. Our diesel tank is safe, reliable and competitive. Welcome to visit and investigate the company, or consult and purchase by telephone or e-mail. 

RuiLin is professional in makeing drilling mud process system. Mud process system can be widely used in many industries. Including O&G drilling, HDD or trenchless, CSM exploration, shielding, pilling, underground industry, tunnelling, mine exploration, etc. Usually, drilling mud process system will include shale shaker, mud cleaner, decanter centrifuge, centrifugal pump, mud mixing pump, degassers, mud agitator, mud tanks, etc.

Mud mixer and mud agitator   Mud mixers, also known as mud tank mixers, are widely used to mix drilling mud in solids control systems. Installed on the mud storage tank or mud tank to prevent the sedimentation of drilling fluid solid particles. Mud mixers are critical solids control equipment for maintaining drilling fluid performance. Ruilin mud mixer adopts worm gear reducer, which has the advantages of large transmission torque and stable performance.     Technical Parameters Model  RLJBQ5.5 RLJBQ7.5 RLJBQ11 RLJBQ15 RLJBQ22 Motor 5.5KW(7.5hp) 7.5KW(10hp) 11KW(15hp) 15KW(20hp) 22KW(30hp) Shaft length According to tank size and client’s requirement Impeller type Canted or turbine blade Impeller layer Double or single Impeller diameter Ø600~Ø1200mm Speed 60RPM or 73RPM Remark When shaft length exceeds 1.7m, there will be stabilizer Benefits 1). Longer usable life on motor and gear box 2).Require less space also easy to handle 3).High efficiency, low noise, low operating temperature 4).Adaptable for different application Agitato

The goal of the mud recycling system is to separate the mud and gravel in the drilling fluid mud, and then ensure that the mud can be recycled, so as to save costs and protect the environment   The characteristics of the trenchless mud purification system treatment plan are: 1) Clean up the mud with a large amount of sediment in the mud 2) The treated mud has high viscosity 3) The mud supply is continuous and the returned mud is not enough to meet the drilling requirements 4) Both sides of the crossing will return mud. 5) Reduce the amount of mud and pollution to the environment 6) The mud performance is stable, which can reduce the occurrence of underground safety accidents caused by mud with poor performance, so as to ensure the smooth progress of the crossing project.   Different solutions can be designed according to the needs of customers. 200GPM,250GPM,500GPM,1000GPM,1500GPM