Copyright(C)Tangshan Ruilin Technology Co.,Ltd  冀ICP备20017114号-1  Powerd by 300.cn
Add: HouYujiadian Village Yuehe Town Kaiping District Tangshan City Hebei E-mail:ogem@ogemsolidscontrol.com  Tel:86-315-2648088
Collection

>
>
>
What precautions should be taken when using the solids control device Hydrocyclone Desilter

What precautions should be taken when using the solids control device Hydrocyclone Desilter

Page view

Hydrocyclone Desilter is mainly composed of vibrating screen, shunt manifold, cyclone, etc. Hydrocyclone Desilter is a three-stage solid control equipment used in drilling fluid solid phase control system. It is mainly used to separate solids with a particle size of 15-47 μm in drilling fluid phase particles. The quality of Hydrocyclone Desilter directly affects the performance of drilling fluid, which in turn affects the quality of drilling engineering.

Hydrocyclone Desilter

So how should the Hydrocyclone Desilter be maintained?

Precautions when installing Hydrocyclone Desilter:

①Place the base of the Hydrocyclone Desilter horizontally and fix it firmly on the tank with 4 pressing plates. Note that the outlet of the screen box should protrude 20-30mm from the edge of the tank.
②Use a rubber hose or steel pipe to connect the liquid inlet and outlet well. The inlet and outlet pipes must match.
③Loosen the 4 vibrating screens and use the compression bolts for transportation.
④ Before use, check whether the bolts of each part are loose and whether the vibration shaft rotates flexibly.
⑤Connect the motor belt, turn on the power supply, and check whether the rotation direction of the Hydrocyclone Desilter motor is correct.
 

 Service