Copyright(C)Tangshan Ruilin Technology Co.,Ltd  冀ICP备20017114号-1  Powerd by 300.cn
Add: HouYujiadian Village Yuehe Town Kaiping District Tangshan City Hebei E-mail:ogem@ogemsolidscontrol.com  Tel:86-315-2648088
Collection

>
>
>
The reason why the material of FLC500 Flate Plate Shaker Screens deviates

The reason why the material of FLC500 Flate Plate Shaker Screens deviates

Page view

FLC500 Flate Plate Shaker Screens is called a linear vibrating screen because the material moves linearly on the screen surface. For some users, it may happen that the material does not move linearly during the screening process. This is what we often do. Said material deviation. Why does this happen? The excitation force on both sides of the FLC500 Flate Plate Shaker Screens is uneven, resulting in deviations caused by inconsistent amplitudes on both sides. Adjusting the angles of the eccentric weights of the two vibration motors to the same can basically solve this problem.

FLC500 Flate Plate Shaker Screens

FLC500 Flate Plate Shaker Screens frame design rigidity is poor, the motion of the sieve body is not translational, but twisting, replace the grid frame with strong rigidity, and fix it firmly. The middle of the linear screen with a wider screen surface also needs a pressurized frame clamp. Similar problems can be solved by making the vibration of the grid frame and the linear screen host at the same frequency without generating natural vibration.

The height of the four support springs of FLC500 Flate Plate Shaker Screens is inconsistent, resulting in uneven supports, which can be resolved by replacing the springs.

For the deviation caused by uneven feeding at the production site, it is necessary to add a feeder to provide uniform feeding, and fully and evenly use the screening area to solve this problem.

The screen box of FLC500 Flate Plate Shaker Screens should be kept horizontally at the same horizontal level during installation. If the horizontal level of the screen box is not balanced, the screen surface will deviate to a certain extent, and the material cannot flow in a straight line;

When the rigidity of the supporting spring of the screen box is too large, it is easy to cause the material to be subjected to excessive excitation force, resulting in severe vibration. If the supporting spring is damaged, the material will be unevenly stressed and flow abnormally.

After the screen of FLC500 Flate Plate Shaker Screens is damaged after being used for a long time, the material cannot flow normally on the screen surface. lead linear vibrating screen

The above items are the common reasons and solutions for the material deviation of FLC500 Flate Plate Shaker Screens. I hope it will be of great help to everyone.
 

 Service