The importance of Solids Control Jet Mud Mixing Pump for drilling
Drilling mud is commonly known as the blood of oil drilling, which explains the importance of Solids Control Jet Mud Mixing Pump and mud mixer for drilling. The Solids Control Jet Mud Mixing Pump and mud mixer make the mud uniform and stable, which is very helpful to the drilling speed.
Solids Control Jet Mud Mixing Pump is necessary for solids reduction and maintenance work to fully agitate the drilling mud. Most drilling fluids must use a drilling fluid agitator to suspend the solid phase in the surface tank to keep the composition of the drilling fluid uniform. Properly adding bentonite, barium sulfate (barite), plugging materials, polymers and chlorides into the drilling fluid is essential to improve drilling efficiency and reduce the amount of additives required.
In order to get the most advantages of drilling fluids, adding them correctly on the surface will help improve their effectiveness in the wellbore. The Solids Control Jet Mud Mixing Pump is used to suspend solid particles, fully mix the drilling fluid materials, and maintain a homogeneous mixture state of the drilling fluid through the ground system. In order to meet these requirements, Solids Control Jet Mud Mixing Pump needs to generate an upward velocity in the drilling fluid tank, and this velocity is greater than the settling velocity of suspended solids. This requires sufficient shear and stirring to dissolve, wet and disperse the drilling fluid additives. The mixing ability of the drilling fluid helps to maintain the viscosity of the drilling fluid.