Copyright(C)Tangshan Ruilin Technology Co.,Ltd  冀ICP备20017114号-1  Powerd by 300.cn
Add: HouYujiadian Village Yuehe Town Kaiping District Tangshan City Hebei E-mail:ogem@ogemsolidscontrol.com  Tel:86-315-2648088
Collection

>
>
>
Features of oilfield drilling fluids desander products

Features of oilfield drilling fluids desander products

Page view

Features of oilfield drilling fluids desander products
1. Oilfield drilling fluids desander products have relatively simple structure, low cost, easy installation and operation. It has a large processing capacity, a small footprint, a wide range of uses, strong adaptability, no power, and maintenance-free operation.

oilfield drilling fluids desander products
2. Compared with mechanical decontamination devices, expansion pipes, buffer boxes and other sand removal equipment, it has the advantages of small size, large processing capacity, low investment and operating costs. The position of the inner wall of the equipment facing the water inlet is provided with a swirl protection plate and a deflector, which is conducive to the formation of swirl; the impact resistance is strong and the service life of the equipment is prolonged.
3. The wall of the cyclone chamber and the sedimentation chamber is equipped with a guide plate, which is conducive to the formation of cyclone sedimentation, so that the impurities can enter the sewage collector as soon as possible, and the sewage collector prevents the impurities from turning over when the system pressure suddenly increases and the water flow increases. It still maintains a good precipitation effect.
4. The lower part of the water outlet is equipped with a stainless steel filter screen and a water blocking ring. The filter screen disperses the water flow, slows down the flow rate, and further retains the suspended impurities in the water; the water flow forms a stable rotating water layer under the filter screen, and the suspended impurities gradually gather around. It gathers into loose small groups under the water blocking ring, and enters the dirt collector along the inner wall under the action of the deflector.
5. Oilfield drilling fluids desander products have strong cleaning ability to the filter screen due to the fast rotating water flow, and will not be fouled during continuous operation. If the system is not cleaned for the first time or has been shut down for a long time, the impurities that can be adhered to the filter screen are difficult to wash away. At this time, the water inlet must be opened to remove the impurities.
Maintenance and maintenance of oilfield drilling fluids desander products:
1. The screen box locking bolts must be removed before the first use of the newly purchased oilfield drilling fluids desander products or after moving.
2. When the cyclone is out of use for a long time, it must be cleaned with clean water to prevent the accumulation of dry sand in the cyclone.
3. Grease the vibration motor every 1500~2500 hours, and the oil filling amount for each bearing is 5~10ml.
4. After the oilfield drilling fluids desander products are shut down, the screen should be cleaned to prevent the sediment from drying out and unable to be used next time.

 Service