Supply high efficiency drilling fluid vacuum degasser oil solid control equipment
Vacuum Degasser (ZCQ series) is a new equipment used to deal with gas invasion drilling fluid, also called negative pressure degasser, can quickly remove all kinds of gas into the drilling fluid, for restoring the specific gravity of mud, stable mud performance, has a very important role. At the same time, it can also be used as a high power agitator, suitable for all kinds of mud circulation purification system. The equipment belongs to the negative pressure degasser, scientific and reasonable design structure, can realize the effective separation of gas and liquid, filter out impurities, to ensure that the exhaust pipe is always smooth.
Working principle of vacuum degasser
Vacuum degasser is the use of vacuum pump suction effect, causing negative pressure area in the vacuum tank, mud under the action of atmospheric pressure, through the suction pipe into the hollow shaft of the rotor, and then by the window around the hollow shaft, is jetted to the wall, due to the impact of collision and separation wheel, the drilling is separated into thin layer, immersed in the mud bubble broken, gas escape, Through the suction of the vacuum pump and the separation of the gas and water separator, the gas is discharged from the exhaust of the separator to the smooth zone, and the mud is discharged from the impeller outside the tank. Because the main motor starts first, and the impeller connected with the motor is in a state of high speed rotation, so the mud can only enter the tank from the suction pipe, will not be inhaled from the drain pipe.